Material
Carbon steel
3000W
Ideal thickness9/16 in
Maximum limit3/4 in
6000W
Ideal thickness3/4 in
Maximum limit1 in
The TUBE Z laser cutter is ideal for thin pipe applications and profiles up to 160mm in diameter, it can cut aluminum, stainless steel, black steel, brass and copper
The TUBE Z laser cutter is ideal for thin pipe applications and profiles up to 160mm in diameter, it can cut aluminum, stainless steel, black steel, brass and copper
We back you up with a solid, comprehensive warranty on all consumables and components. Your investment is protected!
Technical support 7 days a week. Assistance response in 7 minutes. 24/7 technical support platform. On-site assistance in less than 24 hours.
Pre-installation visit. Delivery at your place of work. Electrical installation. Pneumatic installation.
Technical support 7 days a week.
Technical answers in 7 minutes.
24/7 technical support platform.
On-site assistance within 48 hours.
We back you up with a solid, comprehensive warranty on all consumables and components. Your investment is protected!
Pre-installation visit.
Delivery to your site.
Electrical installation.
Pneumatic installation.
Technical support 7 days a week.
Technical answers in 7 minutes.
24/7 technical support platform.
On-site assistance within 48 hours.
We back you up with a solid, comprehensive warranty on all consumables and components. Your investment is protected!
Pre-installation visit.
Delivery to your site.
Electrical installation.
Pneumatic installation.
The versatility of the new FORZA Tube Z laser tube cutting machine adapts to a wide range of industries.
Most of the metal laser cutters have a service life of approximately 10 years, however, much will depend on how the machine is used, as well as whether or not it is maintained on a regular basis.
The power to cut metal can vary depending on the type of application and the metal laser cutting machine being implemented, however, the FORZA ONE laser cutting machine laser cutting machine uses a power of 1500 W and a working voltage of 220 V single phase.
It is important to highlight that laser cutting is very precise and clean, which results in little waste, and that this type of machine is recommended for precise cuts, for example: in curves or small places.
The price of metal laser cutters depends on their model and brand. The FORZA ONE laser cutting machine has an introductory price in Mexico of $28,500 USD.
Laser cutting machines work by means of thermal separation, as the heat of the laser beam melts and vaporizes the metal completely until the desired cuts are obtained. These cuts can be programmed by means of software in the case of the most modern equipment, such as FORZA ONE, as well as with the help of remote controls to optimize processes remotely.
The cutting thickness of a metal laser cutting machine depends on the type of material to be cut. The FORZA ONE machine can cut up to 5/8 in black steel.
No, the software FORZA Play is designed to be easy to use. Even people with no previous experience can operate the machine, as the software allows automatic configurations and is very intuitive.
