Material
black steel
12000W
Ideal thickness1 3/16 in
Maximum limit1 1/2 in
20000W
Ideal thickness1 9/16 in
Maximum limit2 in
30000W
Ideal thickness2 in
Maximum limit2 3/4 in
Designed for H, I, T, angle and channel beams and profiles. Its 5-axis double gantry system ensures high stability and precision in straight and bevel cuts, ideal for large-scale metal structures and advanced manufacturing.
Designed for H, I, T, angle and channel beams and profiles. Its 5-axis double gantry system ensures high stability and precision in straight and bevel cuts, ideal for large-scale metal structures and advanced manufacturing.
Technical support 7 days a week.
Technical answers in 7 minutes.
24/7 technical support platform.
On-site assistance within 48 hours.
We back you up with a solid 4-year comprehensive warranty on your new FORZA Ranger machine.
Your investment is protected!
Pre-installation visit.
Delivery to your site.
Electrical installation.
Pneumatic installation.
We back you up with a solid 5-year comprehensive warranty on your new FORZA Ranger machine.
Your investment is protected!
Technical support 7 days a week. Assistance response in 7 minutes. 24/7 technical support platform. Face-to-face assistance in less than 24 hours.
Pre-installation visit. Delivery at your place of work. Integral installation.
Technical support 7 days a week.
Technical answers in 7 minutes.
24/7 technical support platform.
On-site assistance within 48 hours.
We back you up with a solid, comprehensive warranty on all consumables and components. Your investment is protected!
Pre-installation visit.
Delivery to your site.
Electrical installation.
Pneumatic installation.
Platform with all the parameters you need for any FORZA machine and any material.
The price of metal laser cutters depends on their model and brand. The FORZA Ranger laser cutting machine has an introductory price in Mexico starting at $600,000 MXN for a limited time.
Most of the metal laser cutters have a service life of approximately 10 years, however, much will depend on how the machine is used, as well as whether or not it is maintained on a regular basis.
The power to cut metal can vary depending on the type of application and the metal laser cutting machine being implemented, however, the FORZA ONE laser cutting machine laser cutting machine uses a power of 1500 W and a working voltage of 220 V single phase.
It is important to highlight that laser cutting is very precise and clean, which results in little waste, and that this type of machine is recommended for precise cuts, for example: in curves or small places.
Laser cutting machines work by means of thermal separation, as the heat of the laser beam melts and vaporizes the metal completely until the desired cuts are obtained. These cuts can be programmed by means of software in the case of the most modern equipment, such as FORZA Ranger, as well as with the help of remote controls to optimize processes remotely.
The cutting thickness of a metal laser cutting machine depends on the type of material to be cut. The FORZA Ranger can cut up to 13mm in black steel.
